WDS 7120

Bolt-in Recessed Bush (WDS 7120)

Name: Bolt-in Recessed Bush (WDS 7120)
Brand: WDS

MATERIAL
Steel - hardened
Black oxide finish
Note: Installed bushings should be approximately 0.30mm below the surface of the subplate.

Select a size

Selected Size: 7120-49551

Qty:

All prices shown exclude VAT

In Stock

Selected Size: 7120-49551

$57.85

Your Basket

Scroll the table if you are unable to see all measurements

WDS NO.	F	A	E	G	O.D. -0.01 -0.02 B	Shank Dia C	Bolt Circle Dia I	Bore -.01 -.02 J	Drill Dia K	Depth ± 0.025 L	Min Subplate Thick M	Tap x depth (3 PI Equally Spaced) N	Weight	Qty
7120-49551	9.5	15.82	5.4	6.0	45	20	35	45	21.0	16.21	25	M5 x 0.8 x 9	0.06	Quantity
7120-49552	11.0	19.94	6.4	7.0	55	25	42	55	25.5	20.32	30	M6 x 1.0 x 10	0.05	Quantity
7120-49553	11.0	21.77	6.4	7.0	60	30	48	60	30.5	22.15	35	M6 x 1.0 x 11	0.08	Quantity
7120-49554	14.0	22.61	8.4	9.0	70	35	56	70	40.0	22.99	40	M8 x 1.25 x 17	0.11	Quantity
7120-49555	17.0	31.12	10.4	11.0	92	50	75	92	55.0	31.50	50	M10 x 1.5 x 18	0.18	Quantity
7120-49556	7.6	11.56	4.4	4.5	35	13	25	35	13.5	11.91	20	M4 x 0.7 x 7	0.01	Quantity
7120-49557	7.6	11.56	4.4	4.5	37	16	29	37	21.0	11.91	20	M4 x 0.7 x 7	0.03	Quantity