PowRlock Hydraulic Swing Clamps - 4kN Clamping Force (SF-5800)

Spencer Franklin PowRlock Swing Clamp with 4kN clamping force

Maximum Working Oil Pressure = 170 bar

Double Port type SF-5850 for external sequencing

P = Postion of second port on SF-5850 only -1/4" BSP



The Swing Clamp can be adjusted to either clockwise or anti-clockwise movement. It is supplied to swing clockwise. The drawings in full line show the Swing Clamp in the 'on' position. Arm automatically swings from dotted position to clamping position when pressure is applied to inlet port. When pressure is released the arm automatically returns.

A minimum working pressure of 90 bar is required to raise the clamping plunger after the arm is in position.

Please Note: Single port - SF-5800 versions, should be used in conjunction with a Booster.