Torque screws and torque knobs are unique to WDS. Torque applied to the knurled knob is transmitted to the driving plate of the screw by means of two spring-loaded balls in conical seatings, thereby tightening the screw.
Dependent upon the spring loading, the balls will be forced up the inclined sides of the dimples until they reach the flat surface of the driving plate. Slippage will then occur and no further increase in the clamping load of the screw is possible. To unclamp, the screw is turned counterclockwise.
1 to 6 of 6 results
2 sizes in this range
12 sizes in this range
3 sizes in this range
4 sizes in this range
8 sizes in this range
Contact our Sales Team at firstname.lastname@example.org
Available hours: Monday through Thursday: 8:00am to 5:30pm and Friday 8:00am to 4:30pm GMT