Crampon plaqueur compact MiteeBite (590-54112)

This cam action fixture clamp provides positive down force while using very little space on a fixture. Work pieces can be clamped in series by using the back surface of a clamp to locate the next work piece. The hardened steel clamping element has both a smooth surface for machined work pieces and a serrated clamping surface for rougher work. The height of the clamp can be adjusted by milling the slot deeper in the fixture plate.

J = Mounting screws (Supplied)
K = Total Movement
M = Replacement Cam Screw
N = Replacement Insert
T = Torque (Nm)
P = Holding force (N)

For location it is recommended to fit into 1.5mm deep slot milled to B +0.5
Clamp height can be adjusted by depth of slot
Front of clamp should be E from edge of workpiece

Part of the WDS 590 Metric Steel Mitee Bite Edge Clamps range