Ultra Clamp Fixture MiteeBite (590-56015)
| Weight | 0.26 |
|---|---|
| A | 3.81 |
| B | 3.55 |
| C | 9.52 |
| Clamp Width | 9.52 |
| D | 1.9 |
| Edge | Brass Blunt Edge |
| Max Holding Force N | 875 |
| Pack Quantity | 8 |
| Screw Size | M2.5 |
| Torque N m | 5.6 |
| Total Throw | 0.19 |
- 1 + $151.64 $151.64
- 25 + $144.07 $144.07 Saving 5%
Please Login to see select CAD
ULTRA CLAMPS are all new low-profile fixture clamps that will change the way you work. Employ ULTRA CLAMPS and machine with confidence and with increased productivity and profits.
As engineers and machinists, you're sure to appreciate the simple, sturdy design of this clamp that employs a standard cap screw and oil resistant o-ring. The ULTRA CLAMP is available in five sizes and three styles; a tool steel with both a knife-edge for aggressive stock removal and a flatter edge for general purpose machining. A brass clamp is offered to help prevent marring on finished work and soft material.
Unique feature of ULTRA CLAMPS
Extremely low bite
Positive down force
High resistance to rip-out
Simple, sturdy, high quality design and components
Take a bite out of production costs
Gain maximum tool access to your work
Employ fewer clamps per fixture
Virtually eliminate lost work
Creating Fixtures is Easy, Simply:
1. Machine a slot for the WDS Ultra Clamp.
2. Drill and tap a hole for the cap screw.
3. Assemble the clamp as shown in diagram.
4. Position clamp as shown in diagram and loosely screw to fixture.
5. Insert workpiece and tighten cap screw.
| Unit Type | Metric |
|---|---|
| Pack Quantity | 8 |
| Max Holding Force N | 875 |
| Screw Size | M2.5 |
| Total Throw | 0.19 |
| Torque N m | 5.6 |
| D | 1.9 |
| Clamp Width | 9.52 |
| C | 9.52 |
| B | 3.55 |
| A | 3.81 |
| Weight | 0.256000 |
| Edge | Brass Blunt Edge |
| Stock Guaranteed | No |
| Stock Availability | < 10 |
