Marlco charpy u notch broaching equipment 394mm (6482-203B)

Material

PM-M4 Hss

Notches produced with this equipment conform to BS.131 pt.1, DIN 50115, EN10 045-1 and most recognised standards.

The simplest accurate method for the production of Izod and Charpy notches.

All you need is the fixture, an appropriate broach, a suitable press and a couple of minutes.

• Suitable for ferrous and non-ferrous materials

• Common fixture accommodates 7 interchangeable broaches

• Can be used on any suitable arbor press.Marlco Press 6501BP is ideal

• Load requirement is only 180kg (400lb) on material with UTS of 1.2 kN/sq. mm (75 tons/sq. in.)

• Broach regrind service available

• Always use a suitable cutting oil for broaching

• Fixture Weight = 4kg

* The cut per tooth on broach number 6482-203B is higher than average due to the required notch depth.

If problems are experienced when notching higher tensile materials, then a set of 2 broaches is available as an alternative - broach set 6842-204B comprising first stage 6482-2041B and second stage 6482-2042B.

Part of the WDS 6482 Inch / Metric High Speed Steel Notch Broaching range, other styles and sizes available.