Ultra clamp fixture miteebite (590-56010)

ULTRA CLAMPS are all new low-profile fixture clamps that will change the way you work. Employ ULTRA CLAMPS and machine with confidence and with increased productivity and profits.

As engineers and machinists, you're sure to appreciate the simple, sturdy design of this clamp that employs a standard cap screw and oil resistant o-ring. The ULTRA CLAMP is available in five sizes and three styles; a tool steel with both a knife-edge for aggressive stock removal and a flatter edge for general purpose machining. A brass clamp is offered to help prevent marring on finished work and soft material.

Unique feature of ULTRA CLAMPS

Extremely low bite

Positive down force

High resistance to rip-out

Simple, sturdy, high quality design and components

Take a bite out of production costs

Gain maximum tool access to your work

Employ fewer clamps per fixture

Virtually eliminate lost work

Creating Fixtures is Easy, Simply:

1. Machine a slot for the WDS Ultra Clamp.

2. Drill and tap a hole for the cap screw.

3. Assemble the clamp as shown in diagram.

4. Position clamp as shown in diagram and loosely screw to fixture.

5. Insert workpiece and tighten cap screw.

Part of the WDS 590 Metric Mitee Bite Edge Clamps range, other styles and sizes available.