Spring Plungers and Ball Plungers
Ball Plungers and Spring Plungers
These locating products utilise either a ball or pin to accurately locate a pre defined hole in a work piece. These are available in metric (M3 to M20) and imperial (inch) sizes.
WDS offers two types of plunger, Pin Plungers give the user precise locating using an extended pin available in either hardened steel, nylon or plastic. The pin can retract into the threaded body and will locate the hole when the workpiece is in place.
WDS Ball Spring Plungers operate in a similar manner to the pin counter part, however the ball movement allows for a heavier duty workload. For more specialist applications consider stainless steel spring plungers.
SKUWDS 823Strong force ball spring plungers threaded Stainless Steel 9 parts in this rangeFrom £2.72 £2.27
- SKUWDS 823Strong force ball spring plungers long lok thread Stainless Steel 8 parts in this range
From £3.49 £2.91
- SKUWDS 838Stainless Steel ball spring plunger with plastic ball 6 parts in this range
From £1.00 £0.83
- SKUWDS 606Strong force steel ball spring plunger with internal hex 10 parts in this range
From £1.78 £1.48
- SKUWDS 606Threaded steel ball spring plunger with internal hex 8 parts in this range
From £2.32 £1.93
- SKUWDS 823Long threaded stainless steel ball spring plunger with slot fixing 7 parts in this range
From £3.12 £2.60
- SKUWDS 823High temperature Stainless ceramic ball spring plunger and slot fixing 6 parts in this range
From £3.14 £2.62
- SKUWDS 838Push fit stainless steel pin spring plunger with pom plunger 5 parts in this range
From £2.30 £1.92
